AutoLog® Serial Plug-in modules

AutoLog® Serial Plug-in modules (SP-i) can be used to convert the serial ports functionality to support special communication methods. AutoLog® Serial Plug-in modules can be connected to PLC's serial port plug-in connectors. Check from the PLC and RTU pages if the device supports AutoLog® Serial Plug-in modules. AutoLog® Serial Plug-in modules gets its power from the PLC.

AutoLog® Serial Plug-in module -types:

• AL RS-232/485 SP-i
• AL ModbusTCP SP-i
• AL Ethernet LAN & Web Server SP-i
• AL Wireless LAN & Web Server SP-i

AL RS-232/485 SP-i

AutoLog® RS-232/485 SP-i converts PLC's serial port from point-to-point RS-232 to point-to-multipoint RS-485. Module doesn't need configuration. Two models, isolated and non-isolated.

Order codes:
901157 AL RS-232/485 SP-i Isolated
901165 AL RS-232/485 SP-i Not-isolated

AL ModbusTCP SP-i:

AutoLog® ModbusTCP SP-i can be used to convert Modbus RTU to Modbus TCP. It has also RJ-45 connector. It can be programmed using PC configuration software. Using this module, the PLC can communicate through Ethernet LAN or Internet with control room SCADA software or other PLCs.

Order code:
AL ModbusTCP SP-i 900065

AL Ethernet LAN & Web server SP-i:

AutoLog® Ethernet LAN & Web Server SP-i can be used as web server, serving PLC application pages to Internet browser. It has Ethernet RJ-45 connector. It can send and receive files using FTP. It can send e.g. alarms to e-mail. It can send and receive messages using UDP/TCP.

AL Wireless LAN & Web server SP-i:

AutoLog® Wireless LAN & Web Server SP-i can be used as web server, serving PLC application pages to Internet browser. It can send and receive files using FTP. It can send e.g. alarms to e-mail. It can send and receive messages using UDP/TCP.

Please call or send e-mail to get more information!

FF-Automation
Eräkuja 2
01600 Vantaa
Finland
Tel: +358 10 2190 500