AutoLog® GSM - 16

Build-in GSM/GPRS modem. One free serial port (other serial port is used by modem), which supports AutoLog® Serial Plug-in modules.

DATASHEET_GSM-16

AutoLog® GSM-RTU devices are designed especially to be used in applications where  GSM/GPRS communication is needed. Programming is made very easy; build-in GSM/GPRS driver handles all the complex GSM communication tasks automatically so user can concentrate on application programming. AutoLog® GSM-RTU can be programmed locally using a cable or remotely through GSM network using PC based programming tool or just GSM phone. GSM-PLC has many programming features that are useful in creating GSM applications, like incoming phone number identification etc.

Analog inputs (AI)**	0-8 pcs** Analog input modules, Pt100, KTY10, 0-5V, 0-10V, 0-20mA, 4-20mA, RMS, etc.
Digital inputs (DI)	4 pcs 12/24 VDC / max. 8 mA / PNP / opto-isolated
Relay outputs (RO)	4 pcs 12-24 VDC / max. 2A , 24-230 VAC
Serial ports	1 free serial port (other serial port is used by integrated GSM modem) SER2: RS232/485*, supports AutoLog® Plug-in Modules (PiM).
GSM/GPRS modem	Integrated GSM/GPRS modem and driver.
GSM/SMS communication	GSM-RTU use SMS -messages to communicate bidirectionally with SCADA, GSM phone or other GSM-RTUs. SMS -messages can be used to transfer measurement reports and logs, alarms, events,   controls, settings, acknowledging and remote programming of GSM-RTU.
GPRS/FTP communication	GSM-RTU use GPRS/FTP for sending measurement reports and logs to SCADA.
Call controls	Special controls can be made using free of charge incoming call phone number identification.
Modbus RTU -communication	Modbus can be used in free serial port (SER2) to connect GSM-RTU with other Modbus devices. e.g. SCADA, PLCs or other intelligent devices like electricity meters. Master/Slave, 300-115200bps
I2C-port	1 pcs HMI, iButton, etc.
HMI -user interface	Local user interface can be connected through I2C-port or serial port. Variety of different models from small, character displays to multi-featured Windows CE based graphical touchscreens, with Web Studio SCADA development tool support. Look more from AutoLog® HMI -pages.
SCADA / Control room connection	Through GSM/GPRS network: - AutoLog® ControlMan -service OR - Web Studio SCADA
Battery backup for Flash	Yes
Application program capacity	(FLASH), 256 programming lines, one line is 160 characters and can handle many commands. In addition it has 240 numbers memory for incoming phone number identification and 256 table rows for time controls and 256 -iButton identification.
Programming tool (PC)	AutoLog® GSMProgrammer
Program instructions / functions	Logical compare (<>=), basic calculations (+,-,*,/,modulo), IF-THEN clauses, clock- and calendar controls, PID controllers, incoming phone number identification, password identification, free of charge call controls, data logging, etc.
PID controllers	32 build-in PID controllers
Remote programming	Programming can be made locally using a cable or remotely through GSM network using programming AutoLog® GSMProgrammer or just GSM phone.
Data memory RAM	512kB
Data logging	GSM PLC can save time-stamped measurement or any data into its memory (FTP file = file which can be send using GPRS FTP). FTP file: e.g. 1x 43000 or 4x 21000 or 8x 13000 Time-stamped records
Clock/Calendar	Yes (can be set remotely)
GSM/GPRS modem	Integrated GSM/GPRS modem and driver.
GSM networks	900/1800MHz or 850MHz/1900MHz or Thuraya Satellite
Enclosure	Default: DIN -rail mounting with metal cover, IP20 Opt 2 : plastic box, IP65 Opt 3: metal box. Ask more!
Size (w x h x d)	220 x 125 x 65 mm
Weight	~0,3 kg
Operating temperature	-30...+65 °C
Storage temperature	-40...+80 °C
Power supply	12- 30VDC or 12-24VAC or (Unit models 230VAC) max. 5VA
UPS / lead acid battery	Optional, ask more !
EMC	Immunity according to EN50082-1 & EN50082-2 Emissions according to EN50081-1 & EN50081-2

* RS-485 , Modbus TCP Ethernet or Wireless sensor network needs optional AutoLog® Plug-in module (PiM)

(**) = Analog input modules are NOT included to GSM UNITS by default! So by default all GSM products have no analog inputs. Analog input modules are small modules which are attached to GSM board with plug in connector. The reason for this is that user can select just the right analog input module combination that is needed. E.g. (0-8) means that GSM board supports maximum of 8 analog input modules. Look the list of available analog inputs modules bellow or ask more.

Order information:

AutoLog® GSM- 16

Order Code	900501
Enclosure	Aluminium case, DIN-rail installation
Size (w x h x d)	220 X 125 X 65 mm
Weight	~0,3 kg
GSM/GPRS modem	Yes, build-in
GSM antenna	Yes, stubby with no cable. Optional 0.3m and 2.5m cable avalilable for other antenna types.
Analog input modules	Optional, ordered separately!
Power supply	12- 30VDC or 12-24VAC

AutoLog® GSM- 16 Unit

Order code	900480
Enclosure	Plastic, IP65
Size	ask!
Weight	~0,8 kg
GSM/GPRS modem	Yes, build-in
GSM antenna	Yes, stubby with no cable. Optional 0.3m and 2.5m cable avalilable for other antenna types.
Power supply	12- 30VDC or 12-24VAC or (Unit models 230VAC) max. 5VA
UPS lead acid battery	Optional, (12VDC/1.8Ah can be installed inside the enclosure)
Analog input modules	Optional, ordered separately!
HMI user interface	No

AutoLog® GSM- 16 Unit & HMI

Order code	980480
Enclosure	Plastic, IP65
Size	ask!
Weight	~0,8 kg
GSM/GPRS modem	Yes, build-in
GSM antenna	Yes, stubby with no cable. Optional 0.3m and 2.5m cable avalilable for other antenna types.
UPS lead acid battery	Optional, (12VDC/1.8Ah can be installed inside the enclosure)
Power supply	12- 30VDC or 12-24VAC or 230VAC, max. 5VA
Analog input modules	Optional, ordered separately!
HMI user intrerface	Yes, AL1093F cover mounted model. Uses I2C port.

Optional modules and accessories:

AutoLog® ControlMan	AutoLog ControlMan is easy to use and maintain supervision and control service for GSM-RTUs.	Look Control-Man!
SCADA, control room software	Web Studio SCADA or AutoLog® ControlMan	Look Web Studio!
Analog input modules	Pt100 ( -50..150°C ) Pt100 ( 0..500°C ) Pt100 ( -250..750°C ) 0..5mA 0..20mA 4..20mA, KTY10 (50..150°C), NTC (-5..50°C), 0..2V, 0..5V, 0..10V, -10..10V, RMS 40VAC RMS 25VAC RMS 0.25VAC ask more!	900781 900782 900784 900795 900799 900800 900797 900796 900788 900785 900786 900790 900809 900807 900808
Touchscreens (reserves serial port connection)	Look AutoLog HMIs! Windowsc CE based touchscreens. (Supports Web Studio SCADA development tools)
HMI interfaces (I2C -port connection)	Note! By default 1093F is mounted to Unit&HMI models cover! External model AL1093F (2 x 16 characters) External model AL1095A (8 x 21 characters / 128 x 64 pixels)	900860 900850
AutoLog® GSMProgrammer	PC based AutoLog® GSM-RTU programming tool	941020
AL RS485 PiM, not isolated	RS232/485 converter, On board Plug-in module (PiM = Plug-in Module). reserves one serial port.	901165
AL RS485 PiM, Isolated	RS232/485 converter, Isolated. On board Plug-in module (PiM = Plug-in Module). reserves one serial port.	901157
AL Modbus TCP PiM	Modbus RTU to Modbus TCP (Ethernet) protocol gateway. On board Plug-in module (PiM = Plug-in Module). reserves one serial port.	900065
AL WSN24 PiM MM (Wireless I/O)	Wireless Wi-Fi I/O master module, ask more!	981340
Radio modem	External radio modem for wireless communicating and also remote programming of PLC.	ask

Please call or e-mail to get more information!

FF-Automation
Eräkuja 2
01600 Vantaa
Finland
Tel: +358 9 530 6310
Fax: +358 9 530 63130