AutoLog® 4 PLC

Digital inputs (DI)	4 pcs 12/24 VDC / max. 8 mA / PNP / opto-isolated
Digital outputs (DO)	1 pcs 12/24 VDC / max. 0.5A
Relay outputs (RO)	2 pcs 24-230 VAC / max. 3A
Serial ports**	2 pcs SER1: RS232, (RJ45) / integrated GSM modem** SER2: RS232/485*, supports AutoLog® Serial Plug-in modules.
Modbus RTU -communication	Modbus can run simultaneously in both serial ports. Independent setting for both serial ports, Master/Slave, 300-115200bps
I2C-port	HMI, iButton, etc.
HMI -user interface	Local user interface can be connected through I2C-port or serial port. Variety of different models from small, character displays to multi-featured Windows CE based graphical touchscreens, with Web Studio SCADA development tool support. Look more from AutoLog® HMI -pages.
Battery backup	Yes
Application program capacity	512kB FLASH, 8000 programming lines
Program instructions / functions	Over 260 instructions / functions Logical, arithmetic, comparison, timer/counter, sequence program, reporting, queue, FIFO, PID...
PID controllers	32 build-in PID controllers
Programming tool (PC)	(AutoLog®) ALProWin, instruction list & ladder, symbolic names, trends, monitoring tables, binary and Modbus programming.
Remote programming	PLCs can be programmed remotely through any transmission media, which supports Modbus protocol. e.g. Radio Network, GSM Data, RS-485.
Data memory RAM	512kB
Data logging	PLC can save time-stamped measurement or any data into its memory. E.g. 10 time-stamped measurements x 3000 records.
Clock/Calendar	Yes (can be set remotely)
UPS connector	Yes
GSM/GPRS modem**	Integrated GSM/GPRS modem only in AL6 with GSM -model. GSM application programming is more difficult than in AutoLog® GSM-RTUs. Ask more!
Enclosure	Default: DIN -rail mounting with metal cover, IP20 Opt 2 : plastic box, IP65 Opt 3: metal box. Ask more!
Size (w x h x d)	AL4: 160 X 125 X 65 mm
Weight	~0,3 kg
Operating temperature**	-30...+70 °C
Storage temperature**	-40...+80 °C
Power supply	12 / 24VDC or 10/18VAC max. 5VA
EMC	Immunity according to EN50082-1 & EN50082-2 Emissions according to EN50081-1 & EN50081-2

* RS-485 needs optional AutoLog® Serial plug-in module
** This feature is only in AL6 with GSM -model

Order information:

AutoLog® 4 (same as former AutoLog 6)
 

product name	description	code
AL4 PLC	AutoLog® 4 PLC	900817

Optional modules and accessories:
 

SCADA, control room software	Web Studio / any SCADA on market that supports Modbus ( 99% of SCADAs support Modbus RTU protocol).	Look Web Studio!
Touchscreens (reserves serial port connection)	Look AutoLog HMIs! Windowsc CE/XPE based touchscreens. (Supports Web Studio SCADA development tools)
HMI interfaces (I2C -port connection)	Note! By default 1093F is mounted to Unit&HMI models cover! External model AL1093F (2 x 16 characters) External model AL1095A (8 x 21 characters / 128 x 64 pixels)	900860 900850
ALProWin	PC based AutoLog® PLC programming tool	941020
AL RS485 PiM, not isolated	RS232/485 converter, On board Plug-in module (PiM = Plug-in Module). reserves one serial port.	901165
AL RS485 PiM, Isolated	RS232/485 converter, Isolated. On board Plug-in module (PiM = Plug-in Module). reserves one serial port.	901157
AL Modbus TCP PiM	Modbus RTU to Modbus TCP (Ethernet) protocol gateway. On board Plug-in module (PiM = Plug-in Module). reserves one serial port.	900065
AL WSN24 PiM MM (Wireless I/O)	Wireless Wi-Fi I/O master module, ask more!	981340
Radio modem	External radio modem for wireless communicating and also remote programming of PLC.	ask
GSM modem**	Look AL GSM-4 model!	ask

Please call or send e-mail to get more information!

FF-Automation
Eräkuja 2
01600 Vantaa
Finland
Tel: +358 10 2190 500